Please type the letter of the hard disk to which you want to install this demo, or press ESC to cancel installation.
\\getAnyDrive
Please type the letter of the disk drive to which you want to install this demo, or press ESC to cancel installation.
\\reading
Reading files...
\\complete
Installation complete
\\noSupport
Your system does not appear to support this choice:
%s
Do you wish to install it anyway?
\\ynPrompt
(Y/N)
\\yn
yn
\\pressKeyToExit
Press any key to exit...
\\enterEsc
Press ENTER to continue or ESC to cancel...
\\redirErr
Can't open redirection file for echo command
\\pressKeyToContinue
Press any key to continue...
\\pauseMsg
Press any key to continue...
\\inputErr
Can't find input file: %s
\\outputErr
Can't create output file: %s
\\noMemCopy
Not enough memory for copy
\\copyingTo
Copying %s to %s...
\\copying
Copying %s...
\\dirFound
Directory %s found with existing files!
In order to ensure a proper install, please remove all the Dynamix files from this directory
Do you wish to continue with install?
\\noHelp
No help available for this item.
\\enterConfirm
ENTER to confirm, ESC to re-select
\\confirmExit
Do you wish to exit Install?
\\copyright
Copyright 1991-93
Dynamix, Inc.
All rights reserved.
\\intro
This program will let you specify what type of hardware is installed in your machine.
You must run it once before playing your Dynamix demo. You may want to run it again if you add new hardware to your system or if you are having problems with your first selections.
\\acceptBegin
Accept these choices and begin installation
\\acceptSave
Accept these choices and save configuration
\\restore
Restore Dynamix default choices
\\cancelInstall
Cancel installation and return to DOS
\\installTitle
Installation Choices
\\topPrompt
If you want to change any of these choices, use %c and %c to highlight the selection, then press ENTER.
\\botTitle
Use %c and %c to highlight your choice, then press ENTER to select
\\saveConfig
Saving configuration...
\\configErr
Error creating configuration file
\\driveLetter
Press a drive letter %c through %c, or press ESC to cancel
\\invalidDrive
'%c' is not a valid drive letter.
\\inpfld
ENTER to accept. Ctrl-C to clear. ESC to go back. F1 for help.
\\joystickPrompt
Select the type of joystick you have
\\videoPrompt
Select a graphics adapter from the choices below
\\soundPrompt
Select a music card from the choices below
\\audioPrompt
Select a speech/sound effects card from the choices below.
NOTE: Not all games support speech.
\\keyboardPrompt
Select which style of keyboard you have
\\mousePrompt
Select whether you will use a mouse
\\memoryPrompt
Do you want to use expanded, extended and/or XMS memory?
\\video
Graphics
\\sound
Music
\\audio
Audio
\\joystick
Joystick
\\keyboard
Keyboard
\\mouse
Mouse
\\memory
Memory
\\getMenuPrompt
Use %c, %c and ENTER to select. ESC to go back. F1 for help.
\\supported
%c = supported by your system
\\no
No
\\yes
Yes
\\useMouse
Use Microsoft compatible mouse
\\noUseMouse
Don't use a mouse
\\noUseJoystick
Don't use a joystick
\\useMemory
Use your machine's extra memory
\\noUseMemory
Don't use extra memory
\\memoryHelp
Dynamix games can use your machine's extra memory to speed up play.
\\memoryAppear
Your system appears to have:
\\expandedFree
%4uK Expanded memory free
\\extendedFree
%4uK Extended memory free
\\XMSFree
%4uK XMS memory free
\\noExtraMemory
Your system does not appear to have any extra memory.
\\writeErr
Write protect error
\\mscErr
Error
\\notReadyErr
Not ready error
\\abortRetryMsg
Press R to retry, or A to abort
\\abortRetryKeys
ra
\\unknownErr
Unknown critical error
\\pressAbort
Press a key to abort
\\readMePrompt
Use cursor keys to scroll. Press Esc or Enter to exit
\\viewReadMe
View documentation update in README file
\\docoUpdate
Documentation Update
\\warrantyInfo
Please view the readme file on this disk!
\\makeBootDisk
Make bootable floppy disk
\\keyOrEsc
Press a key to continue or ESC to cancel
\\errorOpening
Error opening %s
\\errorWriting
Error writing to %s
\\errorClosing
Error closing %s
\\bootIntro
This procedure creates a floppy disk you can use to boot your computer to \
ensure that enough conventional memory is available to run this demo.
This procedure will read your current configuration, which may involve \
searching your hard disk to find needed files. Then it will format a floppy \
disk in drive A:, and create appropriate AUTOEXEC.BAT and CONFIG.SYS files on \
the floppy disk.
Not all systems support this procedure, but trying it can do no harm.
\\bootSuccess
The boot disk was created successfully.
Please label the disk in drive %c: "Dynamix Boot Disk".
To use the disk to make sure you have enough memory to run the demo, make sure \
the disk is in floppy drive %c:, close the door to the floppy drive, then \
press the Control, Alt and Del keys simultaneously to reboot your computer.
\\bootShare
Because you are using SHARE, you should reboot without using the boot disk \
after playing the demo
\\bootFail
Boot disk was not created
\\bootReading
Reading your current configuration--please wait
\\bootNeedMem
This demo requires %dK of extended memory and your machine does not have enough.
\\bootNoCOMMAND
Can't make boot disk since you're not using COMMAND.COM
\\bootSearch
Searching hard disk for boot disk files--please wait
\\bootCantFind
Can't find %s--unable to make boot disk
\\bootGetDisk
Please put a blank disk in drive %c:
\\bootCheckDisk
Checking floppy disk--please wait
\\bootCloseDoor
Please close door to drive %c:
\\bootNotFloppy
Drive does not appear to be a floppy drive
\\bootReplaceInstallDisk
Please replace Install disk in drive %c: with an empty disk
\\bootReadingDisk
Reading floppy disk--please wait
\\bootErrorReadingFloppy
Error reading floppy drive
\\bootShowFilesHeader
WARNING! These files were found on the disk in drive %c:
\\bootShowFilesPrompt
Use cursor keys to view list. Is it OK to erase these files? (Y/N)
\\bootPreFormat
The DOS FORMAT program will now be used to format the disk in drive %c:. \
Please follow the directions on the next screen.
\\bootFormat
When DOS asks you to insert new diskette for drive %c:, just leave the current
disk in the drive and press ENTER. Do not remove the disk.
When DOS asks you for a volume label, just press ENTER.
When DOS asks you if you want to format another disk, type 'n' and press ENTER.
\\bootCheckFormat
Checking results of format--please wait
\\bootFormatFail
Format was apparently unsuccessful
\\bootWriteFiles
Writing boot disk files--please wait
\\bootLowDOS
This demo requires DOS version %d.%02d or higher
\\bootNo386
This demo requires a %s processor or better
\\concatenatingTo
Adding %s to %s...
\\bootDOSPrompt
Dynamix Boot Disk
\\bootPutBackInstallDisk
Please replace disk in drive %c with the Install disk
\\bootCopyFiles
Copying files to boot disk--please wait
\\destDir
thedestDir
\\enterNewDir
Directory
\\gameDestDir
Enter directory where demo will be installed
\\directory
directory
\\confirmdirectory
Directory
\\badPath
Invalid Path Name.
\\bootQueryDensity
Is the disk in drive %c: high density?
\\bootBadDensity
You can't format a high density disk in a low density drive
\\bootBadDOSHighToLow
You must have DOS 3.2 or greater to format a low density \
disk in a high density drive
\\redirOpenErr
Error opening redirection file for '%s'
\\redirCloseErr
Error closing redirection file for '%s'
\\execErr
Error executing '%s'
\\noSpace
Drive %c: does not have enough space to install this demo
\\compressedMaybeNoSpace
Drive %c: appears to have been compressed using a utility like Stacker or \
SuperStor. Because our games are already compressed, you may not actually \
have enough disk space to install this demo.
Do you want to try to install to this compressed drive?
\\readingDrives
Reading disk drives--please wait
\\errorReadingDrives
Error reading drives
\\spaceReq
This demo requires %s megabytes disk space.
\\driveSelTitle
Destination Drive Selection
\\driveSelPrompt
Choose a drive to install to from the drives shown below.%s
